2N SmartCOM GPRS Modem
Ref: 2N SmartCOM
This product is only available to registered customers
2N SmartCOM is an intelligent device that allows you to communicate and monitor your assets. Just connect it to an asset, set the IP address for data delivery, and you can begin. 2N SmartCOM uses GPRS technology for data transfer, and you can connect it to pretty much anything with the same interface, such as meters, vending machines, elevators, etc. without the need to install any drivers, software/firmware or anything else.
In the case of large scale deployment, you can use special software - SmartCOM Control Panel that allows you to control all your devices, create groups, monitor the amount of data transferred, update firmware, etc.
If you are looking for a device with easy installation that you can connect to your asset without the need for further changes to your system, 2N SmartCOM is the right choice.
Key Benefits & Main Features:
- Wireless IP monitoring & maintenance over GPRS
- Central management of thousands of terminals
- Protocol independent
- Transparent communication
- Modem emulation mode
- Secured communication
- Management server software
Technical Details
GSM/GPRS
Frequency band - GSM 850/900/1800/1900 MHz
GSM Module - Sierra Wireless WISMO288
SIM card - 3V/1.8V
GPRS Class 10
Receiver reference sensitivity -108 dBm
Transmitter output power - GSM 900/1800 - max 33/30 dBm (+/- 2dB)
Interface RS232
D-sub 9 pin male (female optional)
300-115200 baud
Interface RS485/M-Bus
Optional - 6-pin RJ12 connector
Power supply
DC Power supply - 12V
Mains supply - Adapter 100-240V/50-60Hz to 12V/0.5A
Consumption - Max. 3W
Input/Output
Relay
Max. carrying current: 2A
Max. switching voltage: 250 VAC / 220VDC
Max. switching power: 62.5VA / 30W
Configurable inputs
Digital input
Logical Level Monitoring
Analog input
Voltage measurement (0-10V)
Current measurement (0-20mA)
Antenna
Connector - SMA
Impedance - 50 Ohm
Other
Operating temperature range --40 - 85°C
Dimensions - 69 x 100 x 24 mm