2N SmartCOM is an intelligent device ...
expand for more detail + 2N SmartCOM is an intelligent device that allows you to communicate and monitor your assets. Just connect it to an asset, set the IP address for data delivery, and you can begin. 2N SmartCOM uses GPRS technology for data transfer, and you can connect it to pretty much anything with the same interface, such as meters, vending machines, elevators, etc. without the need to install any drivers, software/firmware or anything else. In the case of large scale deployment, you can use special software - SmartCOM Control Panel that allows you to control all your devices, create groups, monitor the amount of data transferred, update firmware, etc. If you are looking for a device with easy installation that you can connect to your asset without the need for further changes to your system, 2N SmartCOM is the right choice. Key Benefits & Main Features: - Wireless IP monitoring & maintenance over GPRS - Central management of thousands of terminals - Protocol independent - Transparent communication - Modem emulation mode - Secured communication - Management server software Technical Details GSM/GPRS Frequency band - GSM 850/900/1800/1900 MHz GSM Module - Sierra Wireless WISMO288 SIM card - 3V/1.8V GPRS Class 10 Receiver reference sensitivity -108 dBm Transmitter output power - GSM 900/1800 - max 33/30 dBm (+/- 2dB) Interface RS232 D-sub 9 pin male (female optional) 300-115200 baud Interface RS485/M-Bus Optional - 6-pin RJ12 connector Power supply DC Power supply - 12V Mains supply - Adapter 100-240V/50-60Hz to 12V/0.5A Consumption - Max. 3W Input/Output Relay Max. carrying current: 2A Max. switching voltage: 250 VAC / 220VDC Max. switching power: 62.5VA / 30W Configurable inputs Digital input Logical Level Monitoring Analog input Voltage measurement (0-10V) Current measurement (0-20mA) Antenna Connector - SMA Impedance - 50 Ohm Other Operating temperature range --40 - 85°C Dimensions - 69 x 100 x 24 mm
hide more detail -