TRB145
Teltonika TRB145
Teltonika TRB145 RS485 CAT1 LTE 4G Gateway
TRB145
Teltonika TRB145
Teltonika TRB145 RS485 CAT1 LTE 4G Gateway
, ,

Teltonika TRB145 RS485 CAT1 LTE 4G Gateway

TRB145 is a mission-critical LTE Cat 1 gateway, equipped with RS485 interface.

Compact design and easy installation make this gateway perfect for applications, where a sole gadget must be remotely controlled over the RS485 serial interface.

Just like the rest of TRB products, TRB145 is engineered to be used in industrial applications. Therefore, it has a wide range of software features, such as SMS control, Firewall, Open VPN, IPsec, Teltonika Networks Remote Management System (RMS), and FOTA support.

£90.00 Excl VAT

CALL US to discuss volume pricing 01937 534914
Do you need a Fixed IP SIM Card?

Request A Quote Or Project Pricing

TRB145 Teltonika Industrial Rugged LTE RS485 Gateway

The Teltonika TRB145 is an industrial 4G (CAT1) 2G/3G gateway, featuring a Micro-USB socket, an LTE SMA connector and an RS485 port. This gateway uses RutOS, a highly customisable Linux environment with mission-critical LTE capabilities that make it excellent for a wide variety of advanced IoT scenarios, such as providing network access to industrial equipment and computers.

The RS485 port supported by the TRB145 is widely used for remote device management; its 1.2GHz processor and 128Mb of RAM ensures it can excel at this for any device. Among the various other features, the TRB145 supports are firewall services, FOTA, SSH, CLI, VPN and SMS utilities. An additional benefit of the RS485 support is the ability to allow for long cabling distances in environments with a lot of electric noise.

The TRB145 is extremely energy efficient and its frame is robust as well as being small and lightweight, making it highly adaptable and reliable for many scenarios, whether domestic or industrial.

TRB145 Key Features

  • 4G (LTE) – Cat 1 up to 10 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
  • Operator black/white list
  • Teltonika Remote Management System compatible
  • Equipped with RS485 for serial communication
  • Rugged aluminium housing with easy installation
  • 18-month warranty

TRB145 Specification

MOBILE

  • Mobile module

    4G (LTE) – Cat 1 up to 10 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps

  • Status

    Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID

  • SMS

    SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP

  • USSD

    Supports sending and reading Unstructured Supplementary Service Data messages

  • Black/White list

    Operator black/white list

  • Multiple PDN

    Possibility to use different PDNs for multiple network access and services

  • Band management

    Band lock, Used band status display

  • APN

    Auto APN

  • Bridge

    Direct connection (bridge) between mobile ISP and device on LAN

  • Passthrough

    Router assigns its mobile WAN IP address to another device on LAN

NETWORK

  • Routing

    Static routing

  • Network protocols

    TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT

  • VoIP passthrough support

    H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets

  • Connection monitoring

    Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection

  • Firewall

    Port forward, traffic rules, custom rules

  • DHCP

    Static and dynamic IP allocation, DHCP Relay, Relayd

  • QoS / Smart Queue Management (SQM)

    Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e

  • DDNS

    Supported >25 service providers, others can be configured manually

  • Network backup

    Mobile, VRRP, Wired options, each of which can be used as an automatic Failover

  • SSHFS

    Possibility to mount remote file system via SSH protocol

SECURITY

  • Authentication

    Pre-shared key, digital certificates, X.509 certificates

  • Firewall

    Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T

  • Attack prevention

    DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)

  • VLAN

    Port and tag based VLAN separation

  • Mobile quota control

    Custom data limits for SIM card

  • WEB filter

    Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only

  • Access control

    Flexible access control of TCP, UDP, ICMP packets, MAC address filter

VPN

  • OpenVPN

    Multiple clients and a server can run simultaneously, 12 encryption methods

  • OpenVPN Encryption

    DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC

  • IPsec

    IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)

  • GRE

    GRE tunnel

  • PPTP, L2TP

    Client/Server instances can run simultaneously, L2TPv3 support

  • Stunnel

    Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code

  • DMVPN

    Method of building scalable IPsec VPNs

  • SSTP

    SSTP client instance support

  • ZeroTier

    ZeroTier VPN client support

  • WireGuard

    WireGuard VPN client and server support

MODBUS TCP SLAVE

  • ID range

    Respond to one ID in range [1;255] or any

  • Allow Remote Access

    Allow access through WAN

  • Custom registers

    MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality

MODBUS TCP MASTER

  • Supported functions

    01, 02, 03, 04, 05, 06, 15, 16

  • Supported data formats

    8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)

MODBUS RTU MASTER (RS485)

  • Supported baud rates

    From 300 to 115200

  • Supported functions

    01, 02, 03, 04, 05, 06, 15, 16

  • Supported data formats

    8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

  • Number of data bits

    8

  • Number of stop bits

    1

  • Parity

    None, Even, Odd

  • Flow

    None, Xon/Xoff

  • Duplex

    Half duplex

MODBUS DATA TO SERVER

  • Protocol

    HTTP(S), MQTT, Azure MQTT

MQTT GATEWAY

  • MQTT Gateway

    Allows sending commands and receiving data from MODBUS Master through MQTT broker

DNP3

  • Supported modes

    TCP Master, DNP3 Outstation, RTU Master

MONITORING & MANAGEMENT

  • WEB UI

    HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log

  • FOTA

    Firmware update from server, automatic notification

  • SSH

    SSH (v1, v2)

  • SMS

    SMS status, SMS configuration, send/read SMS via HTTP POST/GET

  • Call

    Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer

  • TR-069

    OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem

  • MQTT

    MQTT Broker, MQTT publisher

  • SNMP

    SNMP (v1, v2, v3), SNMP Trap

  • JSON-RPC

    Management API over HTTP/HTTPS

  • MODBUS

    MODBUS TCP status/control

  • RMS

    Teltonika Remote Management System (RMS)

IOT PLATFORMS

  • Cloud of Things

    Allows monitoring of: Device data, Mobile data, Network info, Availability

  • ThingWorx

    Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type

  • Cumulocity

    Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength

  • Azure IoT Hub

    Can send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type

SYSTEM CHARACTERISTICS

  • CPU

    ARM Cortex-A7 1.2 GHz

  • RAM

    128 MB, DDR2

  • FLASH storage

    512 MB, SPI Flash

FIRMWARE / CONFIGURATION

  • WEB UI

    Update FW from file, check FW on server, configuration profiles, configuration backup, restore point

  • FOTA

    Update FW

  • RMS

    Update FW/configuration for multiple devices at once

  • Keep settings

    Update FW without losing current configuration

FIRMWARE CUSTOMIZATION

  • Operating system

    RutOS (OpenWrt based Linux OS)

  • Supported languages

    Busybox shell, Lua, C, C++

  • Development tools

    SDK package with build environment provided

INPUT / OUTPUT

  • Configurable I/O

    2 x Configurable Inputs/Outputs. Digital input 0 – 5 V detected as logic low, 8 – 30 V detected as logic high. Open collector output, max output 30 V, 300 mA (Configurable Inputs/Outputs are not available in TRB145*2****)

  • Output control

    HTTP POST/GET, Schedule

  • Events

    Email, RMS, SMS

  • I/O juggler

    Allows to set certain I/O conditions to initiate event

POWER

  • Connector

    4-pin industrial DC power socket

  • Input voltage range

    9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max

  • Power consumption

    < 5 W

PHYSICAL INTERFACES (PORTS, LEDS, BUTTONS, SIM)

  • Status LEDs

    3 x connection type status LEDs, 3 x connection strength LEDs, 1x Power LED

  • Status LEDs

    3 x connection type status LEDs, 5 x connection strength LEDs, 1 x Power LED

  • SIM

    1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V

  • Power

    1 x 4-pin power connector

  • Antennas

    1 x SMA for LTE

  • RS485

    1 x 6-pin terminal block for 2-wire or 4-wire interface

  • Reset

    Reboot/User default reset/Factory reset button

PHYSICAL SPECIFICATION

  • Casing material

    Aluminum housing

  • Dimensions (W x H x D)

    74.5 x 25 x 64.4 mm

  • Weight

    130 g

  • Mounting options

    Bottom and sideways DIN rail, Flat surface

OPERATING ENVIRONMENT

  • Operating temperature

    -40 °C to 75 °C

  • Operating humidity

    10% to 90% non-condensing

  • Ingress Protection Rating

    IP30

REGULATORY & TYPE APPROVALS

  • Regulatory

    CE/RED, EAC, RoHS, WEEE

EMI IMMUNITY

  • Standards

    Draft ETSI EN 301 489-1 V2.2.0, Draft EN 301 489-19 V2.1.0, Draft ETSI EN 301 489-52 V1.1.0

  • ESD

    EN 61000-4-2:2009

  • RS

    EN 61000-4-3:2006 + A1:2008 + A2:2010

  • EFT

    EN 61000-4-4:2012

  • Surge protection

    EN 61000-4-5:2014

  • CS

    EN 61000-4-6:2014

  • DIP

    EN 61000-4-11:2004

RF

  • Standards

    EN 300 511 V12.5.1, ETSI EN 301 908-1 V11.1.1, ETSI EN 301 908-2 V11.1.2, ETSI EN 301 908-13 V11.1.2

SAFETY

  • Standards

    IEC 62368-1:2014(Second Edition), EN 62368-1:2014+A11:2017

    EN 50385:2017

    EN 62232:2017

SKU: TRB145 Categories: , , Tags: , , , , , , , , ,

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Teltonika TRB145 RS485 CAT1 LTE 4G Gateway”

There are no reviews yet.

Related products