Westermo GW1042W-X-QFR (Virtual Access) Rugged Compact Industrial 4G LTE Router with WiFi

• Low Power consumption (5W)
• Isolated power supply (option)
• Operate from 12 VDC battery backup power (9-36 VDC)
• Wide band coverage APAC & EMEA
• WiFi (2.4GHz) 802.11 bgn (option)

• Continuous testing of the connection to the cellular network
• Configurable roaming functions
• Dual SIM cards

• Authentication of IEC-5-104 commands
• Deep packet inspection of IEC-5-104 messaging
• SSL, IPsec and DMVPN, SHA2 IKEV2 and AES-256

• Centralized configuration via Activator
• No IP knowledge required for installation
• Reduced installation and maintenance costs

Westermo Compact Router Overview

Dual Ethernet Ports
The GW1042W Series router offers two 10/100Mbps Ethernet interfaces. They can be configured as a single interface with Ethernet switching between them or as separate router interfaces.

Cellular Radio Interface
The GW1042W Series router supports category 4 LTE, which has a maximum downstream speed of 150Mbps and a maximum upstream speed of 50Mbps.

A very large set of LTE bands is supported in a single device, providing global network coverage. This simplifies stock control and logistics for multinational operations.

Connection Monitoring & Dual SIM
Dual SIM architecture ensures that a backup 3G or LTE network can take over should the primary network fail. The router detects a network problem and fails over to a standby SIM/APN.

The connection monitor ensures the GW1042W Series router deliveries maximum availability so long as the cellular network is available. For critical applications, a dual SIM architecture ensures that a backup LTE network can take over should the primary network fail. The GW1042W Series router detects a network problem and fails over to a standby SIM/APN.

SMS Management
The GW1042W Series router also supports SMS, so if the packet switched side of the network is down, you can send commands to the router to perform diagnostics or even a reload.

WiFi Option
The GW1042W Series router has two external SMA female connectors for integrated WiFi support. It is capable of supporting both Access Point mode and Station mode concurrently if required.

Mounting Bracket
A bracket is included that enables simple mounting. The bracket can be clipped onto a DIN rail for industrial applications.

Centralised Management and Monitoring
The GW1042W Series router benefits from Activator, Virtual Access’ centralised configuration management and monitoring system. Activator simplifies and automates deployment, management and support tasks in managed network environments. The Zero-Touch deployment functionality built into Activator means GW1042W Series routers can be deployed without the need of onsite configuration or even knowledge of IP or LTE networks.

Software Features

Management
•Automatic configuration using Activator
server
•HTTP/HTTPS
•Command Line Interface via SSHv2
•TFTP client download/upload
•SNMP v1/v2c/3
•SMS management support

Fault Investigation and Reporting

•Event logging
•Syslog support
•Packet tracing

Routing Features

•Virtual Routing and Forwarding (VRF)
•IPv4 and IPv6
•DHCP server/client
•DynDNS
•NAT
•NAT Traversal
•NTP Client
•VLAN support
•Packet filtering
•Firewall
•Port forwarding
•BGPv4, OSPF
•RIP (v1 and v2)
•IPSec/L2TP/GRE
•DMVPN
•SNMP v1/v2/v3
•TLS 1.2
•802.1x authentication
•IEC 104
•QoS
•VRRP

IPSec VPN Options

•IKE version 2
•X.509 certificates
•Elliptic Curve Cryptography (ECC)
•SHA2_512 support
•PFS
•SCEP
•DH_8192

Hardware Features

LAN Interface Options
•Dual 10/100Mbps base-T Ethernet port
•Auto detects a regular or crossover cable for
easy connection to a switch or hub
WAN Interfaces
•Wireless WAN with 3G and LTE options
•Ethernet ports can optionally be configured
for WAN use
WiFi Option
•2.4GHz 802.11bgn
•Concurrent Access Point and Station mode
•Dual SMA sockets
SIM
•2 x SIM card socket with optional slot cover
Antennas
•2 x LTE SMA female antenna connectors
•MIMO support in LTE versions
•WiFi option has 2 x female RP-SMA
connectors
LEDs
•Power indicator
•Ethernet activity
•Active SIM

Cellular Technologies

•LTE Category 4
•LTE FDD Bands:
• B1/B2/B3/B4/B5/B7/B8/B12/B13/
B18/B19/B20/B26/B28
•LTE TDD Bands:
• B38/B39/B40/B41
•WCDMA Bands:
• B1/B2/B4/B5/B6/B8/B19
•GSM Bands:
• B2/B3/B5/B8

Approvals and Certificates

•EN 60950 safety approval
•EN 55022 and EN 55024 EMC
•EN 300 328 V1.9.1
Power
•Input voltage 9-36V DC isolated
•Optional 9-36V DC non-isolated

Physical and Environment

•Unit size: 115W 111D 38H mm
•Unit size with mounting bracket: 120W
120D 45H mm
•Unit weight: 420g
•Mounting bracket included
Operating temperature
•-40 Celcius to +70 Celcius