FWA510 High Speed 5G Internet Connectivity From Zyxel
Powerful Chip, 5G Unleashed
Thanks to the mind-blowingly fast chip, which is designed with an integrated quad-core Arm CPU, it provides 5G speeds of up to an impressive 5 Gbps* right out of the box. Along with the two integrated 2.5 Gbps Gigabit Ethernet interfaces, allowing it a wide range of LAN port configurations for ultra-fast speed for connection to servers, workstations, or high-end gaming devices.
Get ground-breaking performance in both speed and wide-spectrum bandwidth for multi-streaming data access and reduce network latency for premium and time-sensitive internet services now!
Accelerate with WiFi 6
Fast and vast. When 5G meets WiFi 6, they can boost larger bandwidth and capacity than previous legacy solutions. The Nebula FWA510 offers speeds of up to 3.6 Gbps** on dual bands with the latest WiFi 6 (AX3600) standard. Nebula FWA510 can deliver an optimal seamless high-speed WiFi experience to 64 wireless devices simultaneously.
NEBULA FWA510 Connections
You can note from the image below the FWA510 has 4 x TS9 connections for use with an outdoor 5G antenna and has 2 x 2.5GB Ethernet ports and a USB3 port which can be used with a USB memory stick to provide basic file sharing. If you are considering using the Zyxel FWA510 router with an external antenna we recommend testing the router outdoors (on a dry day) in the intended antenna location and checking the signal strength and speed (we recommend testing with both an Ethernet cable and WiFi when doing speed tests) and to then move the FWA510 router indoors to it’s fixed location and make the same tests and if the difference is considerable then an outdoor antenna may help with the performance. If the indoor and outdoor tests are fairly similar then an outdoor antenna may not improve the service.
System specifications
IP networking
Supports IPv4/IPv6 dual stack (NDP IPv6)
DHCP server
Virtual Private Network (VPN) pass-through
Supports NAT/NAPT
Supports DMZ
Multiple APNs
Supports port forwarding
Routing
Supports bridge and router modes
Supports remote management under bridge mode
Static/dynamic routing settings for RIP v1/v2
IP firewall
DoS attack detection
Supports SPI (Stateful Packet Inspection)
Application-level firewall (LAN to WAN such as HTTP, Telnet, Ping)
Filters LAN MAC address
Filters LAN IP address
Management
Supports local/remote device management and firmware upgrade via Nebula Cloud and web GUI
SMS management
PIN/PUK manage ment
APN management
Operating frequency band selection
Supports Zyxel Air app (iOS and Android) for easy installation and local management only
WLAN feature
Auto channel selection
WiFi Protected Setup (WPS)
WiFi Multimedia (WMM)
WiFi-enabled devices: up to 64
Security: none, WPA2-Personal, WPA+WPA2, WPA2+WPA3, WPA3
MAC address filtering with 64 address supported
Multiple SSIDs/hide SSIDs
WLAN scheduling
Hardware Specifications
5G NR interface
3GPP Release 15 standard-compliant
Supports both NSA and SA modes
Supports Sub-6 NR DL 2xCA (TDD/FDD)
Supports frequencies:
FDD: n1, n3, n5, n7, n8, n20, n28
TDD: n38, n40, n41, n77, n78
Supports DL 4×4 MIMO:
FDD: n1, n3, n5, n7
TDD: n38, n40, n41, n77, n78
Data rates:
5G SA: DL 4.67 Gbps*; UL: 2.5 Gbps*
5G NSA: DL 3.74 Gbps*; UL: 1.46 Gbps*
Output power:
Class 2 (26 dBm) for 5G NR n41/n78
Class 3 (23 dBm) for all 5G NR bands
4G LTE interface
3GPP UE Category 19 standard-compliant
Supports frequencies:
LTE-FDD: B1/B3/B5/B7/B8/B20/B28/B32
LTE-TDD: B38/B40/B41/B42
Supports DL 4×4 MIMO:
LTE-FDD: B1/B3/B7
LTE-TDD: B38/B40/B41/B42
Peak data rates:
Max. DL 1.6 Gbps/UL 200 Mbps**
Supports DL modulation QPSK, 16-QAM, 64-QAM and 256-QAM
Supports UL modulation QPSK, 16-QAM, 64-QAM and 256-QAM
Output power:
Class 2 (26 dBm) for LTE B41
Class 3 (23 dBm) for FDD/TDD LTE bands
WiFi air interface
Wireless standard:
IEEE 802.11 b/g/n/a/ac/ax
Wireless speeds:
Link rates up to 1.2 Gbps** for 2.4 GHz
Link rates up to 2.4 Gbps** for 5 GHz
WiFi antenna gain:
~3 dBi for 2.4 GHz
~5 dBi for 5 GHz
5G NR/4G LTE antennas
Four TS9 connectors for external antennas***
Four embedded omni-directional antennas
Ultra-high band:
Up to 5 dBi peak gain
High band and middle band:
Up to 5 dBi peak gain
Low band:
Up to 4 dBi peak gain
Hardware interface
Two 100/1000/2500 Mbps Ethernet RJ-45 LAN ports, LAN2 can be configured for Ethernet WAN port
LED indicators:
Power indication
SMS status
Signal strength
Internet connection status
Radio access technology status
WiFi AP status
WPS status
Four external antenna connectors (TS9 type)***
One 3FF/Micro SIM card slot
One power on/off button
One WPS/WiFi on/off button
One reset button
One Int/Ext antenna switch
One USB 3.0 host port for file sharing
Power consumption
48 W (peak)
Physical Specifications
Item
dimensions (WxDxH):
132.5 x 134 x 230 mm (5.22” x 5.28” x 9.06”)
weight:
1,006 g (2.22 lb.)
Packing
dimensions (WxDxH):
250 x 200 x 140 mm (9.84” x 7.87” x 5.51”)
weight:
1,504 g (3.32 lb.)
Environmental Specifications
Operating Environment
Temperature:
0°C to 40°C (32°F to 104°F)
Humidity:
10% to 90% (non-condensing) Storage Environment
Storage Environment
Temperature:
-30°C to 70°C (-22°F to 158°F)
Humidity:
5% to 95% (non-condensing)
Certification
CE/Safety
WEEE (Waste Electrical and Electronic Equipment) Directive certification
RoHS (Restriction of Hazardous Substances) Directive certification
HSF (Hazardous Substance Free)
European Parliament and Council
Directive 94/62/EC of December 20, 1994 on packaging and packaging waste
Package Contents
EU/UK power adaptor
Ethernet cable 1.8 m 8P8C
Quick start guide
Warranty card
DoC
Safety warranty
There are no reviews yet.